PassLeader just published the NEWEST Fortinet NSE6_FSW-7.2 exam dumps! And, PassLeader offer two types of the NSE6_FSW-7.2 dumps — NSE6_FSW-7.2 VCE dumps and NSE6_FSW-7.2 PDF dumps, both VCE and PDF contain the NEWEST NSE6_FSW-7.2 exam questions, they will help you PASSING the Fortinet NSE6_FSW-7.2 exam easily! Now, get the NEWEST NSE6_FSW-7.2 dumps in VCE and PDF from PassLeader — https://www.passleader.com/nse6-fsw-7-2.html (52 Q&As Dumps)
What’s more, part of that PassLeader NSE6_FSW-7.2 dumps now are free — https://drive.google.com/drive/folders/1S7OH16ozMsWqA9CkmPqa8huyUuf-rR-o
NEW QUESTION 1
Which statement about the quarantine VLAN on FortiSwitch is true?
A. Quarantine VLAN has no DHCP server.
B. Users who fail 802.1X authentication can be placed on the quarantine VLAN.
C. It is only used for quarantined devices if global setting is set to quarantine by VLAN.
D. FortiSwitch can block devices without configuring quarantine VLAN to be part of the allowed VLANs.
Answer: B
Explanation:
Because you CAN (not must) place devices that try to authenticate through 802.1X, but fail, in the VLAN selected as Authentication fail VLAN. In the example image of the Study Guide, they used quarantined VLAN for this option.
NEW QUESTION 2
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
A. FortiSwitch supports only by VLAN quarantine mode.
B. FortiGate applies the quarantine-related configuration only on FortiGate.
C. FortiAnalyzer with a threat detection services license is required.
D. MAC address quarantine can be enabled through the FortiGate CLI only.
Answer: CD
NEW QUESTION 3
How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?
A. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces.
B. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.
C. FortiGate configures and enables flow sampling on FortiSwitch but does not change existing sampling settings of interfaces.
D. FortiGate configures and enables egress sampling on all management interfaces.
Answer: B
Explanation:
perimeter: FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.
NEW QUESTION 4
Which two types of Layer 3 interfaces can participate in dynamic routing on FortiSwitch? (Choose two.)
A. Detected management interfaces.
B. Loopback interfaces.
C. Switch virtual interfaces.
D. Physical interfaces.
Answer: BC
Explanation:
You can configure Layer 3 interfaces to perform routing on FortiSwitch. The following types of Layer 3 interfaces are supported: Loopback […] Switch virtual interface (SVI).
NEW QUESTION 5
What feature can network administrators use to segment network operations and the administration of managed FortiSwitch devices on FortiGate?
A. FortiGate multi-tenancy.
B. Multi-chassis link aggregation trunk.
C. FortiGate clustering protocol.
D. FortiLink split interface.
Answer: A
NEW QUESTION 6
Which packet capture method allows FortiSwitch to capture traffic on trunks and management interfaces?
A. SPAN.
B. Sniffer profile.
C. sFlow.
D. TCP dump.
Answer: B
Explanation:
Sniffer profile can capture in internal, mgmt, switch ports and trunks interfaces.
NEW QUESTION 7
Which Ethernet frame can create Layer 2 flooding due to all bytes on the destination MAC address being set to all FF?
A. The broadcast Ethernet frame.
B. The unicast Ethernet frame.
C. The multicast Ethernet frame.
D. The anycast Ethernet frame.
Answer: A
NEW QUESTION 8
Which is a requirement to enable SNMP v2c on a managed FortiSwitch?
A. Create an SNMP user to use for authentication and encryption.
B. Specify an SNMP host to send traps to.
C. Enable an SNMP v3 to handle traps messages with SNMP hosts.
D. Configure SNMP agent and communities.
Answer: D
NEW QUESTION 9
What can an administrator do to maintain a FortiGate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLinK?
A. Use a migration tool based on Python script to convert the configuration.
B. Enable the FortiLink setting on FortiSwitch before the authorization process.
C. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process.
D. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate.
Answer: A
Explanation:
The tool is a Python script that converts the supported settings in a FortiSwitch standalone configuration file to the equivalent FortiOS settings for a managed switch.
NEW QUESTION 10
Which two statements about VLAN assignments on FortiSwitch ports are true? (Choose two.)
A. Configure a native VLAN on the FortiLink.
B. Assign an IP address and subnet mask to FortiSwitch VLANs.
C. Only assign one native VLAN on a port.
D. Assign untagged VLANs using FortiGate CLI.
Answer: CD
Explanation:
For the native VLAN setting, you can select one VLAN only untagged-vlans only available on the CLI.
NEW QUESTION 11
Which two rules used by MSTP are similar to rules used by other STP methods? (Choose two.)
A. MSTP uses port role election, similar to rapid STP on the instances.
B. MSTP uses alternate path and primary path, similar to regular STP.
C. MSTP uses root bridge selection, similar to rapid STP.
D. MSTP uses timers for transitioning the ports, similar to regular STP.
Answer: AC
Explanation:
Because MSTP is based on RSTP, the same rules used by RSTP for root bridge and port role election are used by MSTP on their instances.
NEW QUESTION 12
Which statement about 802.1X security profiles using MAC-based authentication mode is true?
A. FortiSwitch allows connectivity to all hosts connected to a port, if one host is authenticated.
B. FortiSwitch can grant each device a different access level based on the credentials provided.
C. FortiSwitch performs faster when using this security mode on the ports.
D. FortiSwitch must communicate with the RADIUS server to authenticate devices.
Answer: B
Explanation:
However, if you want to authenticate each device behind a port, and optionally, grant each device a different access level based on the credentials provided, then MAC-based is required.
NEW QUESTION 13
How does FortiSwitch perform actions on ingress and egress traffic using the access control list (ACL)?
A. Only high-end FortiSwitch models support ACL.
B. ACL can be used only at the prelookup stage in the traffic processing pipeline.
C. Classifiers enable matching traffic based only on the VLAN ID.
D. FortiSwitch checks ACL policies only from top to bottom.
Answer: D
NEW QUESTION 14
An administrator needs to deploy managed FortiSwitch devices in a remote location where multiple VLANs must be utilized to segment devices. No Layer 3 switch or router is present. The the only WAN connectivity is the router provided by the ISP connected to the public internet. Which two items will the administrator need to use? (Choose two.)
A. A FortiSwitch interface connected to the ISP router configured with fortilink-13-mode enabled.
B. FortiSwitch and FortiGate devices configured with VXLAN interfaces.
C. FortiSwitch devices configured with NAT disabled.
D. FortiSwitch devices that have the required internal hardware for this configuration.
E. FortiSwitch and FortiGate devices configured with IPsec interfaces.
Answer: AC
NEW QUESTION 15
In which two ways can you assign a FortiSwitch port to a VDOM using multi-tenancy setup? (Choose two.)
A. Switch the FortiLink interface to the target VDOM.
B. Remove the managed FortiSwitch and allocate ports directly on FortiSwitch.
C. Create a virtual port pool on the FortiGate CLI.
D. Assign a port to a VDOM directly on the managed FortiSwitch.
Answer: CD
NEW QUESTION 16
Which two statements about DHCP snooping enabled on a FortiSwitch VLAN are true? (Choose two.)
A. Enabling DHCP snooping on a FortiSwitch VLAN ensures requests and replies are seen by all DHCP servers.
B. switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks.
C. By default, all FortiSwitch ports are set to forward client DHCP requests to untrusted ports.
D. Settings related to DHCP option 82 are only configurable through the CLI.
Answer: CD
NEW QUESTION 17
Which statement about the configuration of VLANs on a managed FortiSwitch port is true?
A. Untagged VLANs must be part of the allowed VLANs: ingress and egress.
B. FortiSwitch VLAN interfaces are created only when FortiSwitch is managed by Forti-Gate.
C. The native VLAN is implicitly part of the allowed VLAN on the port.
D. Allowed VLANS expand the collision domain to the port.
Answer: C
NEW QUESTION 18
Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)
A. All hosts behind an authenticated port are allowed access after a successful authentica-tion.
B. A security policy is used to apply 802.1 authentication on a port.
C. A local user database must be used to authenticate devices using the 802.1X authentica-tion protocol.
D. All devices connecting to FortiSwitch must support 802.1X authentication.
Answer: AB
NEW QUESTION 19
Which two statements about managing a FortiSwitch stack on FortiGate are true? (Choose two.)
A. A FortiLink interface must be enabled on FortiGate.
B. The switch controller feature must be enabled on FortiGate.
C. Only a hardware-based FortiGate can manage a FortiSwitch stack.
D. FortiSwitch must be operating in standalone mode before authorization.
Answer: AB
NEW QUESTION 20
What can an administrator do to maintain the existing standalone FortlSwltch configuration while changing the management mode to FortLink?
A. Use a migration tool based on python script to convert the configuration.
B. Enable the Forti-link setting on FortiSwitch before the authorization process.
C. FortiGate will automatically save the existing FortiSwitch configuration during the Forti-link management process.
D. Register FortiSwitch to For1ISwitch Cloud to save a copy before managing by Forti-Gate.
Answer: B
NEW QUESTION 21
……
Learning the PassLeader NSE6_FSW-7.2 dumps with VCE and PDF for 100% passing Fortinet certification — https://www.passleader.com/nse6-fsw-7-2.html (52 Q&As Dumps)
BONUS!!! Download part of PassLeader NSE6_FSW-7.2 dumps for free — https://drive.google.com/drive/folders/1S7OH16ozMsWqA9CkmPqa8huyUuf-rR-o